What Should We Pay Attention To When Using Hot Air Gun

1. Do not use the Hot Air Gun with a chemical (plastic) blade.

2. Please remove the dry paint from the nozzle or scraper after use to avoid ignition.

3, please use in a well-ventilated place, because the residue removed from the lead paint is toxic.

4. Do not use a hot air gun as a hair dryer.

5. Do not direct hot air directly to people or animals.

6. When the hot air gun is used or just after use, do not touch the nozzle hot air gun handle must be kept dry, clean and away from oil or gas.

7. The heat gun must be completely cooled before it can be stored.

The hot air gun is one of the most used tools in mobile phone repairs, and the process requirements are also very high. Hot air guns are used to remove or install small components to large integrated circuits. In different occasions, there are special requirements for the temperature and air volume of the heat gun. If the temperature is too low, it will cause the component to be soldered. If the temperature is too high, the worst component and circuit board will be damaged. It is also important for the selection of Temperature Adjustable Hot Air Gun to blow off small components when the air volume is too high. Do not choose low-grade hot air guns because of price issues.